Garage Doors - Questions & Answers
Answers to questions are provided for informational purposes only and are not intended as legal, medical, financial, or other professional advice or as a substitute for seeking professional assistance on your particular situation or factual circumstances. Thryv, Inc., provider of yellowpages.com, disclaims any and all liability for the information provided in Answers, including from your reliance on Answers for any purpose. Any responders designated as a “Pro” are practitioners in their relevant field, but their Answers represent their own opinions and are not endorsed by Thryv, Inc. Some responders, such as those designated as “Content Contributor,” may receive some form of compensation for providing Answer content. Information provided in Answers may not represent the full scope of options available in the relevant field, and may not be updated to account for recent changes in an industry or market. If you have a medical or other emergency, please dial 911 or contact a professional to seek appropriate assistance with your specific concern.
Answers provided for informational purposes only – not intended as professional advice on any particular situation. This site disclaims all liability for Answers.
All Questions (54)
Filter by Topic:
Where can I buy a garage door torsion spring in Louisville to replace my broken one? I have all the tools to do it myself
AnswerAnonymous
There are several places in Louisville where you can purchase a garage door torsion spring:
- Overhead Door Company of Louisville: They offer a variety of garage door torsion springs and can even provide installation services if needed.
- A-1 Garage Doors: They have a wide selection of garage door torsion springs and can help you determine the right one for your door.
- Louisville Overhead Door: They offer garage door torsion springs from top brands and can help you find the right one for your door.
- Sears PartsDirect: You can order garage door torsion springs online from Sears PartsDirect and pick them up at their local store in Louisville.
- Amazon: You can also purchase garage door torsion springs on Amazon and have them delivered to your doorstep.
garage door opens but will not close until overhead light goes off and it will close but will not open until over head light goes off, why?
AnswerAnonymous
It is likely that there is a problem with the safety sensors. The safety sensors are located on either side of the garage door near the ground, and they are designed to prevent the door from closing if something is blocking the path of the door. If the safety sensors are blocked or not functioning properly, the garage door opener will not close the door. The overhead light may be interfering with the sensors, causing them to malfunction. Try adjusting or cleaning the sensors to see if that resolves the issue. If the sensors cannot be adjusted or cleaned, they may need to be replaced....Read More
Door closes and then opens and stays open Why
AnswerAnonymous
There could be various reasons why a door closes and then opens and stays open. Some possible explanations include:
- There is something obstructing the path of the door. This could be a small object like a piece of paper or a larger obstruction like a piece of furniture. If the door encounters an obstacle when trying to close, it may reopen to prevent damage or injury.
- The door hinges are loose or damaged. If the hinges are not properly secured or have become worn over time, the door may not be able to fully close or may swing back open after closing.
- The door closer is malfunctioning. A door closer is a device that helps regulate the speed and force of a closing door. If the closer is not functioning properly, it may cause the door to close and then immediately reopen or fail to close fully.
- The door latch is not properly aligned. If the door latch is not correctly aligned with the strike plate (the metal plate on the door frame), the door may not fully close or may reopen after closing.
If you are experiencing this issue, it may be helpful to inspect the door and its components to see if any of these issues are present. If you are unsure of how to do so, it may be best to contact a professional for assistance.
...Read More
When I press the garage door opener the motor runs but the door won;t open or closse
AnswerAnonymous
Read 1 More AnswerThe plastic Gear assembly is stripped or the steel sprocket is broken.
...Read More
When I open my automatic garage opener it goes up about 8 inches then stops and buzzes
AnswerAnonymous
There are a few potential causes for this issue:
- The safety sensors may be misaligned or blocked - The garage door opener may be detecting an obstacle or obstruction in the path of the door, causing it to stop and buzz. Check to make sure the sensors are properly aligned and that nothing is blocking their path.
- The track or rollers may be dirty or damaged - If the garage door is having trouble moving smoothly up the track, it may cause the opener to stop and buzz. Inspect the track and rollers for any dirt, debris, or damage.
- The motor or gears may be worn or damaged - If the opener has been used extensively over a long period of time, the motor or gears may have worn down or become damaged. This can cause the opener to struggle to lift the door and eventually stop and buzz.
- The opener may need to be reprogrammed or reset - Sometimes the opener may need to be programmed or reset to properly function again. Check the user manual for instructions on how to do this.
If none of these solutions work, it may be best to call a professional garage door technician to inspect and repair the opener.
...Read More